• Feb 07, 2023 News!IJMO will adopt Article-by-Article Work Flow   [Click]
  • Aug 25, 2023 News!Vol. 13, No. 3 has been published with online version.   [Click]
  • Dec 21, 2023 News!Vol. 13, No. 4 has been published with online version.   [Click]
General Information
Prof. Adrian Olaru
University Politehnica of Bucharest, Romania
I'm happy to take on the position of editor in chief of IJMO. It's a journal that shows promise of becoming a recognized journal in the area of modelling and optimization. I'll work together with the editors to help it progress.
IJMO 2020 Vol.10(3): 104-108 ISSN: 2010-3697
DOI: 10.7763/IJMO.2020.V10.755

New 19 Axes Single-Processor System, for Door Moldings Manufacturing

P. Badescu and N. Mihai

Abstract—The present paper describes a new technology for the manufacture of interior door moldings, in the spirit of Industry 4.0. A new manufacturing method is presented, using a single processor for all 19 axes numerically controlled. Thus, production costs are reduced, while the productivity and quality of the products increases. All operations are performed automatically, without the intervention of the human factor. Some of the electromechanical devices used are completely original. The data are processed in real time by a software platform, which also performs real-time diagnostics.

Index Terms—Door moldings, numerical control, real-time diagnostics, single processor.

P. Badescu is with the Solicorp Software Inc. in Montréal, Quebec, Canada.
N. Miha is with the Technoaccord Inc. in Laval, Quebec, Canada (e-mail: mniculae@technoaccord.com).


Cite: P. Badescu and N. Mihai, "New 19 Axes Single-Processor System, for Door Moldings Manufacturing," International Journal of Modeling and Optimization vol. 10, no. 3, pp. 104-108, 2020.

Copyright © 2020 by the authors. This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited (CC BY 4.0).

Copyright © 2008-2024. International Journal of Modeling and Optimization. All rights reserved.
E-mail: ijmo@iacsitp.com